Which is better, 10-10-10 or 20-20-20 fertilizer?

picture of Hazel Brooks
Hazel Brooks
picture of Leonard Cartwright
Leonard Cartwright
Published:
Updated:

Neither one wins. They are the same recipe at two strengths. Both hold equal parts nitrogen, phosphate, and potash. So the two bags share a balanced fertilizer concentration. The only real gap is potency. A bag of 20-20-20 is twice as strong per pound as a bag of 10-10-10. That one fact drives every other difference between them. Once you see why, the choice gets a lot simpler.

The two products look like rivals on the shelf. They are not. A balanced fertilizer just means the three big numbers match. 10-10-10 is 10% of each nutrient. 20-20-20 is 20% of each. Same proportions, more punch in the stronger bag. Think of it like juice versus juice from concentrate. One simply has more water mixed in. The rest of each bag is filler that helps you spread the nutrients evenly.

The math is short. To find how much product you need, divide your nitrogen target by the bag's nitrogen rate. For 20-20-20 you divide by 0.20 instead of 0.10. That cuts the amount in half. A higher fertilizer concentration means you spread less product to hit the same feeding. The balanced fertilizer concentration stays the same on the label, but the dose per scoop climbs. Extension offices like Iowa State teach this exact step for setting an application rate.

Here is the side-by-side at a common target. Say you want 0.5 pound of nitrogen spread over 1,000 square feet. You need 5 pounds (2.3 kg) of 10-10-10 to get there. You need only 2.5 pounds (1.1 kg) of 20-20-20 for the same feeding. Less product to buy, less weight to haul, the same nitrogen on the ground. That is the whole appeal of the stronger bag. You carry half the weight for the same result, and a smaller bag goes further across a big lawn.

Same Ratio, Different Strength
10-10-10
  • Holds 10% each of nitrogen, phosphate, and potash.
  • Divide your nitrogen target by 0.10 to find product needed.
  • Needs 5 pounds (2.3 kg) per 1,000 square feet for 0.5 pound nitrogen.
  • More filler per bag, so heavier to spread for the same nutrients.
20-20-20
  • Holds 20% each, twice as strong per pound.
  • Divide your nitrogen target by 0.20 instead.
  • Needs only 2.5 pounds (1.1 kg) for the same 0.5 pound nitrogen.
  • Less filler, but easier to over-apply if you do not measure.

The stronger bag carries one trap. With half the product doing the same work, a small spreader error pushes more nutrient onto the soil at once. Over-applying 20-20-20 burns roots faster than the milder 10-10-10 would. The fix is simple. Measure by weight, not by the scoop. Do that, and the stronger bag is just as safe as the weaker one.

There is a quieter problem that the bigger number hides. Both blends pour out equal phosphorus. Most yards already hold plenty of it. On average garden soil, a balanced bag over-supplies phosphorus. The extra runs off into waterways. It does not help your plants at all. The richer bag only doubles down on that waste, since each scoop drops more phosphorus than the milder bag would.

So the real question is not which number is bigger. It is whether a balanced ratio suits your soil in the first place. Run a soil test before you buy either bag. A test costs only a few dollars and tells you what your ground actually lacks. If the results show plenty of phosphorus, a nitrogen-only or low-phosphorus feed beats both of these. If your soil truly runs low across all three nutrients, then pick whichever bag is cheaper per pound of nitrogen. Measure it out with care, and the strength on the label stops mattering.

Read the full article: 10-10-10 Fertilizer: How Much and When

Continue reading